http
をテンプレートにして作成
[
トップ
] [
新規
|
一覧
|
単語検索
|
最終更新
|
ヘルプ
]
開始行:
#
# This is the main Apache server configuration file. It ...
# configuration directives that give the server its instr...
# See <URL:http://httpd.apache.org/docs/2.2/> for detaile...
# In particular, see
# <URL:http://httpd.apache.org/docs/2.2/mod/directives.ht...
# for a discussion of each configuration directive.
#
#
# Do NOT simply read the instructions in here without und...
# what they do. They're here only as hints or reminders....
# consult the online docs. You have been warned.
#
# The configuration directives are grouped into three bas...
# 1. Directives that control the operation of the Apache...
# whole (the 'global environment').
# 2. Directives that define the parameters of the 'main'...
# which responds to requests that aren't handled by a...
# These directives also provide default values for th...
# of all virtual hosts.
# 3. Settings for virtual hosts, which allow Web request...
# different IP addresses or hostnames and have them h...
# same Apache server process.
#
# Configuration and logfile names: If the filenames you s...
# of the server's control files begin with "/" (or "drive...
# server will use that explicit path. If the filenames d...
# with "/", the value of ServerRoot is prepended -- so "l...
# with ServerRoot set to "/etc/httpd" will be interpreted...
# server as "/etc/httpd/logs/foo.log".
#
### Section 1: Global Environment
#
# The directives in this section affect the overall opera...
# such as the number of concurrent requests it can handle...
# can find its configuration files.
#
#
# Don't give away too much information about all the subc...
# we are running. Comment out this line if you don't min...
# finding out what major optional modules you are running
ServerTokens OS
#
# ServerRoot: The top of the directory tree under which t...
# configuration, error, and log files are kept.
#
# NOTE! If you intend to place this on an NFS (or otherw...
# mounted filesystem then please read the LockFile docume...
# (available at <URL:http://httpd.apache.org/docs/2.2/mod...
# you will save yourself a lot of trouble.
#
# Do NOT add a slash at the end of the directory path.
#
ServerRoot "/etc/httpd"
#
# PidFile: The file in which the server should record its...
# identification number when it starts.
#
PidFile run/httpd.pid
#
# Timeout: The number of seconds before receives and send...
#
Timeout 120
#
# KeepAlive: Whether or not to allow persistent connectio...
# one request per connection). Set to "Off" to deactivate.
#
KeepAlive Off
#
# MaxKeepAliveRequests: The maximum number of requests to...
# during a persistent connection. Set to 0 to allow an un...
# We recommend you leave this number high, for maximum pe...
#
MaxKeepAliveRequests 100
#
# KeepAliveTimeout: Number of seconds to wait for the nex...
# same client on the same connection.
#
KeepAliveTimeout 15
##
## Server-Pool Size Regulation (MPM specific)
##
# prefork MPM
# StartServers: number of server processes to start
# MinSpareServers: minimum number of server processes whi...
# MaxSpareServers: maximum number of server processes whi...
# ServerLimit: maximum value for MaxClients for the lifet...
# MaxClients: maximum number of server processes allowed ...
# MaxRequestsPerChild: maximum number of requests a serve...
<IfModule prefork.c>
StartServers 8
MinSpareServers 5
MaxSpareServers 20
ServerLimit 256
MaxClients 256
MaxRequestsPerChild 4000
</IfModule>
# worker MPM
# StartServers: initial number of server processes to start
# MaxClients: maximum number of simultaneous client conne...
# MinSpareThreads: minimum number of worker threads which...
# MaxSpareThreads: maximum number of worker threads which...
# ThreadsPerChild: constant number of worker threads in e...
# MaxRequestsPerChild: maximum number of requests a serve...
<IfModule worker.c>
StartServers 2
MaxClients 150
MinSpareThreads 25
MaxSpareThreads 75
ThreadsPerChild 25
MaxRequestsPerChild 0
</IfModule>
#
# Listen: Allows you to bind Apache to specific IP addres...
# ports, in addition to the default. See also the <Virtua...
# directive.
#
# Change this to Listen on specific IP addresses as shown...
# prevent Apache from glomming onto all bound IP addresse...
#
#Listen 12.34.56.78:80
Listen 80
#
# Dynamic Shared Object (DSO) Support
#
# To be able to use the functionality of a module which w...
# have to place corresponding `LoadModule' lines at this ...
# directives contained in it are actually available _befo...
# Statically compiled modules (those listed by `httpd -l'...
# to be loaded here.
#
# Example:
# LoadModule foo_module modules/mod_foo.so
#
LoadModule auth_basic_module modules/mod_auth_basic.so
LoadModule auth_digest_module modules/mod_auth_digest.so
LoadModule authn_file_module modules/mod_authn_file.so
LoadModule authn_alias_module modules/mod_authn_alias.so
LoadModule authn_anon_module modules/mod_authn_anon.so
LoadModule authn_dbm_module modules/mod_authn_dbm.so
LoadModule authn_default_module modules/mod_authn_default...
LoadModule authz_host_module modules/mod_authz_host.so
LoadModule authz_user_module modules/mod_authz_user.so
LoadModule authz_owner_module modules/mod_authz_owner.so
LoadModule authz_groupfile_module modules/mod_authz_group...
LoadModule authz_dbm_module modules/mod_authz_dbm.so
LoadModule authz_default_module modules/mod_authz_default...
LoadModule ldap_module modules/mod_ldap.so
LoadModule authnz_ldap_module modules/mod_authnz_ldap.so
LoadModule include_module modules/mod_include.so
LoadModule log_config_module modules/mod_log_config.so
LoadModule logio_module modules/mod_logio.so
LoadModule env_module modules/mod_env.so
LoadModule ext_filter_module modules/mod_ext_filter.so
LoadModule mime_magic_module modules/mod_mime_magic.so
LoadModule expires_module modules/mod_expires.so
LoadModule deflate_module modules/mod_deflate.so
LoadModule headers_module modules/mod_headers.so
LoadModule usertrack_module modules/mod_usertrack.so
LoadModule setenvif_module modules/mod_setenvif.so
LoadModule mime_module modules/mod_mime.so
LoadModule dav_module modules/mod_dav.so
LoadModule status_module modules/mod_status.so
LoadModule autoindex_module modules/mod_autoindex.so
LoadModule info_module modules/mod_info.so
LoadModule dav_fs_module modules/mod_dav_fs.so
LoadModule vhost_alias_module modules/mod_vhost_alias.so
LoadModule negotiation_module modules/mod_negotiation.so
LoadModule dir_module modules/mod_dir.so
LoadModule actions_module modules/mod_actions.so
LoadModule speling_module modules/mod_speling.so
LoadModule userdir_module modules/mod_userdir.so
LoadModule alias_module modules/mod_alias.so
LoadModule rewrite_module modules/mod_rewrite.so
LoadModule proxy_module modules/mod_proxy.so
LoadModule proxy_balancer_module modules/mod_proxy_balanc...
LoadModule proxy_ftp_module modules/mod_proxy_ftp.so
LoadModule proxy_http_module modules/mod_proxy_http.so
LoadModule proxy_connect_module modules/mod_proxy_connect...
LoadModule cache_module modules/mod_cache.so
LoadModule suexec_module modules/mod_suexec.so
LoadModule disk_cache_module modules/mod_disk_cache.so
LoadModule file_cache_module modules/mod_file_cache.so
LoadModule mem_cache_module modules/mod_mem_cache.so
LoadModule cgi_module modules/mod_cgi.so
#
# The following modules are not loaded by default:
#
#LoadModule cern_meta_module modules/mod_cern_meta.so
#LoadModule asis_module modules/mod_asis.so
#
# Load config files from the config directory "/etc/httpd...
#
Include conf.d/*.conf
#
# ExtendedStatus controls whether Apache will generate "f...
# information (ExtendedStatus On) or just basic informati...
# Off) when the "server-status" handler is called. The de...
#
#ExtendedStatus On
#
# If you wish httpd to run as a different user or group, ...
# httpd as root initially and it will switch.
#
# User/Group: The name (or #number) of the user/group to ...
# . On SCO (ODT 3) use "User nouser" and "Group nogroup".
# . On HPUX you may not be able to use shared memory as ...
# suggested workaround is to create a user www and use...
# NOTE that some kernels refuse to setgid(Group) or semc...
# when the value of (unsigned)Group is above 60000;
# don't use Group #-1 on these systems!
#
User apache
Group apache
### Section 2: 'Main' server configuration
#
# The directives in this section set up the values used b...
# server, which responds to any requests that aren't hand...
# <VirtualHost> definition. These values also provide de...
# any <VirtualHost> containers you may define later in th...
#
# All of these directives may appear inside <VirtualHost>...
# in which case these default settings will be overridden...
# virtual host being defined.
#
#
# ServerAdmin: Your address, where problems with the serv...
# e-mailed. This address appears on some server-generate...
# as error documents. e.g. admin@your-domain.com
#
ServerAdmin panhead@draconia.jp
#
# ServerName gives the name and port that the server uses...
# This can often be determined automatically, but we reco...
# it explicitly to prevent problems during startup.
#
# If this is not set to valid DNS name for your host, ser...
# redirections will not work. See also the UseCanonicalN...
#
# If your host doesn't have a registered DNS name, enter ...
# You will have to access it by its address anyway, and t...
# redirections work in a sensible way.
#
#ServerName panhead.homeip.net
#
# UseCanonicalName: Determines how Apache constructs self...
# URLs and the SERVER_NAME and SERVER_PORT variables.
# When set "Off", Apache will use the Hostname and Port s...
# by the client. When set "On", Apache will use the valu...
# ServerName directive.
#
UseCanonicalName on
#
# DocumentRoot: The directory out of which you will serve...
# documents. By default, all requests are taken from this...
# symbolic links and aliases may be used to point to othe...
#
DocumentRoot "/var/www/html"
#
# Each directory to which Apache has access can be config...
# to which services and features are allowed and/or disab...
# directory (and its subdirectories).
#
# First, we configure the "default" to be a very restrict...
# features.
#
<Directory />
Options FollowSymLinks ExecCGI
AllowOverride None
</Directory>
#
# Note that from this point forward you must specifically...
# particular features to be enabled - so if something's n...
# you might expect, make sure that you have specifically ...
# below.
#
#
# This should be changed to whatever you set DocumentRoot...
#
<Directory "/var/www/html">
#
# Possible values for the Options directive are "None", "...
# or any combination of:
# Indexes Includes FollowSymLinks SymLinksifOwnerMatch ...
#
# Note that "MultiViews" must be named *explicitly* --- "...
# doesn't give it to you.
#
# The Options directive is both complicated and important...
# http://httpd.apache.org/docs/2.2/mod/core.html#options
# for more information.
#
Options Indexes FollowSymLinks
#
# AllowOverride controls what directives may be placed in...
# It can be "All", "None", or any combination of the keyw...
# Options FileInfo AuthConfig Limit
#
AllowOverride All
#
# Controls who can get stuff from this server.
#
Order allow,deny
Allow from all
</Directory>
#
# UserDir: The name of the directory that is appended ont...
# directory if a ~user request is received.
#
# The path to the end user account 'public_html' director...
# accessible to the webserver userid. This usually means...
# must have permissions of 711, ~userid/public_html must ...
# of 755, and documents contained therein must be world-r...
# Otherwise, the client will only receive a "403 Forbidde...
#
# See also: http://httpd.apache.org/docs/misc/FAQ.html#fo...
#
<IfModule mod_userdir.c>
#
# UserDir is disabled by default since it can confirm...
# of a username on the system (depending on home dire...
# permissions).
#
UserDir disable
#
# To enable requests to /~user/ to serve the user's p...
# directory, remove the "UserDir disable" line above,...
# the following line instead:
#
#UserDir public_html
</IfModule>
#
# Control access to UserDir directories. The following i...
# for a site where these directories are restricted to re...
#
#<Directory /home/*/public_html>
# AllowOverride FileInfo AuthConfig Limit
# Options MultiViews Indexes SymLinksIfOwnerMatch Incl...
# <Limit GET POST OPTIONS>
# Order allow,deny
# Allow from all
# </Limit>
# <LimitExcept GET POST OPTIONS>
# Order deny,allow
# Deny from all
# </LimitExcept>
#</Directory>
#
# DirectoryIndex: sets the file that Apache will serve if...
# is requested.
#
# The index.html.var file (a type-map) is used to deliver...
# negotiated documents. The MultiViews Option can be use...
# same purpose, but it is much slower.
#
DirectoryIndex index.html index.html.var
#
# AccessFileName: The name of the file to look for in eac...
# for additional configuration directives. See also the ...
# directive.
#
AccessFileName .htaccess
#
# The following lines prevent .htaccess and .htpasswd fil...
# viewed by Web clients.
#
<Files ~ "^\.ht">
Order allow,deny
Deny from all
</Files>
#
# TypesConfig describes where the mime.types file (or equ...
# to be found.
#
TypesConfig /etc/mime.types
#
# DefaultType is the default MIME type the server will us...
# if it cannot otherwise determine one, such as from file...
# If your server contains mostly text or HTML documents, ...
# a good value. If most of your content is binary, such ...
# or images, you may want to use "application/octet-strea...
# keep browsers from trying to display binary files as th...
# text.
#
DefaultType text/plain
#
# The mod_mime_magic module allows the server to use vari...
# contents of the file itself to determine its type. The...
# directive tells the module where the hint definitions a...
#
<IfModule mod_mime_magic.c>
# MIMEMagicFile /usr/share/magic.mime
MIMEMagicFile conf/magic
</IfModule>
#
# HostnameLookups: Log the names of clients or just their...
# e.g., www.apache.org (on) or 204.62.129.132 (off).
# The default is off because it'd be overall better for t...
# had to knowingly turn this feature on, since enabling i...
# each client request will result in AT LEAST one lookup ...
# nameserver.
#
HostnameLookups Off
#
# EnableMMAP: Control whether memory-mapping is used to d...
# files (assuming that the underlying OS supports it).
# The default is on; turn this off if you serve from NFS-...
# filesystems. On some systems, turning it off (regardle...
# filesystem) can improve performance; for details, pleas...
# http://httpd.apache.org/docs/2.2/mod/core.html#enablemmap
#
#EnableMMAP off
#
# EnableSendfile: Control whether the sendfile kernel sup...
# used to deliver files (assuming that the OS supports it...
# The default is on; turn this off if you serve from NFS-...
# filesystems. Please see
# http://httpd.apache.org/docs/2.2/mod/core.html#enablese...
#
#EnableSendfile off
#
# ErrorLog: The location of the error log file.
# If you do not specify an ErrorLog directive within a <V...
# container, error messages relating to that virtual host...
# logged here. If you *do* define an error logfile for a...
# container, that host's errors will be logged there and ...
#
ErrorLog logs/error_log
#
# LogLevel: Control the number of messages logged to the ...
# Possible values include: debug, info, notice, warn, err...
# alert, emerg.
#
LogLevel warn
#
# The following directives define some format nicknames f...
# a CustomLog directive (see below).
#
LogFormat "%h %l %u %t \"%r\" %>s %b \"%{Referer}i\" \"%{...
LogFormat "%h %l %u %t \"%r\" %>s %b" common
LogFormat "%{Referer}i -> %U" referer
LogFormat "%{User-agent}i" agent
# "combinedio" includes actual counts of actual bytes rec...
# requires the mod_logio module to be loaded.
#LogFormat "%h %l %u %t \"%r\" %>s %b \"%{Referer}i\" \"%...
#
# The location and format of the access logfile (Common L...
# If you do not define any access logfiles within a <Virt...
# container, they will be logged here. Contrariwise, if ...
# define per-<VirtualHost> access logfiles, transactions ...
# logged therein and *not* in this file.
#
#CustomLog logs/access_log common
#
# If you would like to have separate agent and referer lo...
# the following directives.
#
#CustomLog logs/referer_log referer
#CustomLog logs/agent_log agent
#
# For a single logfile with access, agent, and referer in...
# (Combined Logfile Format), use the following directive:
#
CustomLog logs/access_log combined
#
# Optionally add a line containing the server version and...
# name to server-generated pages (internal error document...
# listings, mod_status and mod_info output etc., but not ...
# documents or custom error documents).
# Set to "EMail" to also include a mailto: link to the Se...
# Set to one of: On | Off | EMail
#
ServerSignature On
#
# Aliases: Add here as many aliases as you need (with no ...
# Alias fakename realname
#
# Note that if you include a trailing / on fakename then ...
# require it to be present in the URL. So "/icons" isn't...
# example, only "/icons/". If the fakename is slash-term...
# realname must also be slash terminated, and if the fake...
# trailing slash, the realname must also omit it.
#
# We include the /icons/ alias for FancyIndexed directory...
# do not use FancyIndexing, you may comment this out.
#
Alias /icons/ "/var/www/icons/"
<Directory "/var/www/icons">
Options Indexes MultiViews FollowSymLinks
AllowOverride None
Order allow,deny
Allow from all
</Directory>
#
# WebDAV module configuration section.
#
<IfModule mod_dav_fs.c>
# Location of the WebDAV lock database.
DAVLockDB /var/lib/dav/lockdb
</IfModule>
#
# ScriptAlias: This controls which directories contain se...
# ScriptAliases are essentially the same as Aliases, exce...
# documents in the realname directory are treated as appl...
# run by the server when requested rather than as documen...
# The same rules about trailing "/" apply to ScriptAlias ...
# Alias.
#
ScriptAlias /cgi-bin/ "/var/www/cgi-bin/"
#
# "/var/www/cgi-bin" should be changed to whatever your S...
# CGI directory exists, if you have that configured.
#
#<Directory "/var/www/cgi-bin">
# AllowOverride None
# Options None
# Order allow,deny
# Allow from all
#</Directory>
#from Fedora4
<Directory "/var/www/cgi-bin">
Options ExecCGI
AllowOverride None
Allow from all
Order allow,deny
</Directory>
#
# Redirect allows you to tell clients about documents whi...
# your server's namespace, but do not anymore. This allow...
# clients where to look for the relocated document.
# Example:
# Redirect permanent /foo http://www.example.com/bar
#
# Directives controlling the display of server-generated ...
#
#
# IndexOptions: Controls the appearance of server-generat...
# listings.
#
IndexOptions FancyIndexing VersionSort NameWidth=* HTMLTa...
#
# AddIcon* directives tell the server which icon to show ...
# files or filename extensions. These are only displayed...
# FancyIndexed directories.
#
AddIconByEncoding (CMP,/icons/compressed.gif) x-compress ...
AddIconByType (TXT,/icons/text.gif) text/*
AddIconByType (IMG,/icons/image2.gif) image/*
AddIconByType (SND,/icons/sound2.gif) audio/*
AddIconByType (VID,/icons/movie.gif) video/*
AddIcon /icons/binary.gif .bin .exe
AddIcon /icons/binhex.gif .hqx
AddIcon /icons/tar.gif .tar
AddIcon /icons/world2.gif .wrl .wrl.gz .vrml .vrm .iv
AddIcon /icons/compressed.gif .Z .z .tgz .gz .zip
AddIcon /icons/a.gif .ps .ai .eps
AddIcon /icons/layout.gif .html .shtml .htm .pdf
AddIcon /icons/text.gif .txt
AddIcon /icons/c.gif .c
AddIcon /icons/p.gif .pl .py
AddIcon /icons/f.gif .for
AddIcon /icons/dvi.gif .dvi
AddIcon /icons/uuencoded.gif .uu
AddIcon /icons/script.gif .conf .sh .shar .csh .ksh .tcl
AddIcon /icons/tex.gif .tex
AddIcon /icons/bomb.gif core
AddIcon /icons/back.gif ..
AddIcon /icons/hand.right.gif README
AddIcon /icons/folder.gif ^^DIRECTORY^^
AddIcon /icons/blank.gif ^^BLANKICON^^
#
# DefaultIcon is which icon to show for files which do no...
# explicitly set.
#
DefaultIcon /icons/unknown.gif
#
# AddDescription allows you to place a short description ...
# server-generated indexes. These are only displayed for...
# directories.
# Format: AddDescription "description" filename
#
#AddDescription "GZIP compressed document" .gz
#AddDescription "tar archive" .tar
#AddDescription "GZIP compressed tar archive" .tgz
#
# ReadmeName is the name of the README file the server wi...
# default, and append to directory listings.
#
# HeaderName is the name of a file which should be prepen...
# directory indexes.
ReadmeName README.html
HeaderName HEADER.html
#
# IndexIgnore is a set of filenames which directory index...
# and not include in the listing. Shell-style wildcardin...
#
IndexIgnore .??* *~ *# HEADER* README* RCS CVS *,v *,t
#
# DefaultLanguage and AddLanguage allows you to specify t...
# a document. You can then use content negotiation to giv...
# file in a language the user can understand.
#
# Specify a default language. This means that all data
# going out without a specific language tag (see below) w...
# be marked with this one. You probably do NOT want to set
# this unless you are sure it is correct for all cases.
#
# * It is generally better to not mark a page as
# * being a certain language than marking it with the wrong
# * language!
#
# DefaultLanguage nl
#
# Note 1: The suffix does not have to be the same as the ...
# keyword --- those with documents in Polish (whose net-s...
# language code is pl) may wish to use "AddLanguage pl .p...
# avoid the ambiguity with the common suffix for perl scr...
#
# Note 2: The example entries below illustrate that in so...
# the two character 'Language' abbreviation is not identi...
# the two character 'Country' code for its country,
# E.g. 'Danmark/dk' versus 'Danish/da'.
#
# Note 3: In the case of 'ltz' we violate the RFC by usin...
# specifier. There is 'work in progress' to fix this and ...
# the reference data for rfc1766 cleaned up.
#
# Catalan (ca) - Croatian (hr) - Czech (cs) - Danish (da)...
# English (en) - Esperanto (eo) - Estonian (et) - French ...
# Greek-Modern (el) - Hebrew (he) - Italian (it) - Japane...
# Korean (ko) - Luxembourgeois* (ltz) - Norwegian Nynorsk...
# Norwegian (no) - Polish (pl) - Portugese (pt)
# Brazilian Portuguese (pt-BR) - Russian (ru) - Swedish (...
# Simplified Chinese (zh-CN) - Spanish (es) - Traditional...
#
AddLanguage ca .ca
AddLanguage cs .cz .cs
AddLanguage da .dk
AddLanguage de .de
AddLanguage el .el
AddLanguage en .en
AddLanguage eo .eo
AddLanguage es .es
AddLanguage et .et
AddLanguage fr .fr
AddLanguage he .he
AddLanguage hr .hr
AddLanguage it .it
AddLanguage ja .ja
AddLanguage ko .ko
AddLanguage ltz .ltz
AddLanguage nl .nl
AddLanguage nn .nn
AddLanguage no .no
AddLanguage pl .po
AddLanguage pt .pt
AddLanguage pt-BR .pt-br
AddLanguage ru .ru
AddLanguage sv .sv
AddLanguage zh-CN .zh-cn
AddLanguage zh-TW .zh-tw
#
# LanguagePriority allows you to give precedence to some ...
# in case of a tie during content negotiation.
#
# Just list the languages in decreasing order of preferen...
# more or less alphabetized them here. You probably want ...
#
LanguagePriority ja en ca cs da de el eo es et fr he hr i...
#
# ForceLanguagePriority allows you to serve a result page...
# MULTIPLE CHOICES (Prefer) [in case of a tie] or NOT ACC...
# [in case no accepted languages matched the available va...
#
ForceLanguagePriority Prefer Fallback
#
# Specify a default charset for all content served; this ...
# interpretation of all content as UTF-8 by default. To ...
# default browser choice (ISO-8859-1), or to allow the ME...
# in HTML content to override this choice, comment out this
# directive:
#
#AddDefaultCharset UTF-8
#
# AddType allows you to add to or override the MIME confi...
# file mime.types for specific file types.
#
#AddType application/x-tar .tgz
#
# AddEncoding allows you to have certain browsers uncompr...
# information on the fly. Note: Not all browsers support ...
# Despite the name similarity, the following Add* directi...
# to do with the FancyIndexing customization directives a...
#
#AddEncoding x-compress .Z
#AddEncoding x-gzip .gz .tgz
# If the AddEncoding directives above are commented-out, ...
# probably should define those extensions to indicate med...
#
AddType application/x-compress .Z
AddType application/x-gzip .gz .tgz
#
# AddHandler allows you to map certain file extensions to...
# actions unrelated to filetype. These can be either buil...
# or added with the Action directive (see below)
#
# To use CGI scripts outside of ScriptAliased directories:
# (You will also need to add "ExecCGI" to the "Options" d...
#
AddHandler cgi-script .cgi
#
# For files that include their own HTTP headers:
#
#AddHandler send-as-is asis
#
# For type maps (negotiated resources):
# (This is enabled by default to allow the Apache "It Wor...
# to be distributed in multiple languages.)
#
AddHandler type-map var
#
# Filters allow you to process content before it is sent ...
#
# To parse .shtml files for server-side includes (SSI):
# (You will also need to add "Includes" to the "Options" ...
#
AddType text/html .shtml
AddOutputFilter INCLUDES .shtml
#
# Action lets you define media types that will execute a ...
# a matching file is called. This eliminates the need for...
# pathnames for oft-used CGI file processors.
# Format: Action media/type /cgi-script/location
# Format: Action handler-name /cgi-script/location
#
#
# Customizable error responses come in three flavors:
# 1) plain text 2) local redirects 3) external redirects
#
# Some examples:
#ErrorDocument 500 "The server made a boo boo."
#ErrorDocument 404 /missing.html
#ErrorDocument 404 "/cgi-bin/missing_handler.pl"
#ErrorDocument 402 http://www.example.com/subscription_in...
#
#
# Putting this all together, we can internationalize erro...
#
# We use Alias to redirect any /error/HTTP_<error>.html.v...
# our collection of by-error message multi-language colle...
# includes to substitute the appropriate text.
#
# You can modify the messages' appearance without changin...
# default HTTP_<error>.html.var files by adding the line:
#
# Alias /error/include/ "/your/include/path/"
#
# which allows you to create your own set of files by sta...
# /var/www/error/include/ files and
# copying them to /your/include/path/, even on a per-Virt...
#
Alias /error/ "/var/www/error/"
<IfModule mod_negotiation.c>
<IfModule mod_include.c>
<Directory "/var/www/error">
AllowOverride None
Options IncludesNoExec
AddOutputFilter Includes html
AddHandler type-map var
Order allow,deny
Allow from all
LanguagePriority en es de fr
ForceLanguagePriority Prefer Fallback
</Directory>
# ErrorDocument 400 /error/HTTP_BAD_REQUEST.html.var
# ErrorDocument 401 /error/HTTP_UNAUTHORIZED.html.var
# ErrorDocument 403 /error/HTTP_FORBIDDEN.html.var
# ErrorDocument 404 /error/HTTP_NOT_FOUND.html.var
# ErrorDocument 405 /error/HTTP_METHOD_NOT_ALLOWED.htm...
# ErrorDocument 408 /error/HTTP_REQUEST_TIME_OUT.html....
# ErrorDocument 410 /error/HTTP_GONE.html.var
# ErrorDocument 411 /error/HTTP_LENGTH_REQUIRED.html.var
# ErrorDocument 412 /error/HTTP_PRECONDITION_FAILED.ht...
# ErrorDocument 413 /error/HTTP_REQUEST_ENTITY_TOO_LAR...
# ErrorDocument 414 /error/HTTP_REQUEST_URI_TOO_LARGE....
# ErrorDocument 415 /error/HTTP_UNSUPPORTED_MEDIA_TYPE...
# ErrorDocument 500 /error/HTTP_INTERNAL_SERVER_ERROR....
# ErrorDocument 501 /error/HTTP_NOT_IMPLEMENTED.html.var
# ErrorDocument 502 /error/HTTP_BAD_GATEWAY.html.var
# ErrorDocument 503 /error/HTTP_SERVICE_UNAVAILABLE.ht...
# ErrorDocument 506 /error/HTTP_VARIANT_ALSO_VARIES.ht...
</IfModule>
</IfModule>
#
# The following directives modify normal HTTP response be...
# handle known problems with browser implementations.
#
BrowserMatch "Mozilla/2" nokeepalive
BrowserMatch "MSIE 4\.0b2;" nokeepalive downgrade-1.0 for...
BrowserMatch "RealPlayer 4\.0" force-response-1.0
BrowserMatch "Java/1\.0" force-response-1.0
BrowserMatch "JDK/1\.0" force-response-1.0
#
# The following directive disables redirects on non-GET r...
# a directory that does not include the trailing slash. ...
# problem with Microsoft WebFolders which does not approp...
# redirects for folders with DAV methods.
# Same deal with Apple's DAV filesystem and Gnome VFS sup...
#
BrowserMatch "Microsoft Data Access Internet Publishing P...
BrowserMatch "MS FrontPage" redirect-carefully
BrowserMatch "^WebDrive" redirect-carefully
BrowserMatch "^WebDAVFS/1.[0123]" redirect-carefully
BrowserMatch "^gnome-vfs/1.0" redirect-carefully
BrowserMatch "^XML Spy" redirect-carefully
BrowserMatch "^Dreamweaver-WebDAV-SCM1" redirect-carefully
#
# Allow server status reports generated by mod_status,
# with the URL of http://servername/server-status
# Change the ".example.com" to match your domain to enable.
#
#<Location /server-status>
# SetHandler server-status
# Order deny,allow
# Deny from all
# Allow from .example.com
#</Location>
#
# Allow remote server configuration reports, with the URL...
# http://servername/server-info (requires that mod_info....
# Change the ".example.com" to match your domain to enable.
#
#<Location /server-info>
# SetHandler server-info
# Order deny,allow
# Deny from all
# Allow from .example.com
#</Location>
#
# Proxy Server directives. Uncomment the following lines to
# enable the proxy server:
#
#<IfModule mod_proxy.c>
#ProxyRequests On
#
#<Proxy *>
# Order deny,allow
# Deny from all
# Allow from .example.com
#</Proxy>
#
# Enable/disable the handling of HTTP/1.1 "Via:" headers.
# ("Full" adds the server version; "Block" removes all ou...
# Set to one of: Off | On | Full | Block
#
#ProxyVia On
#
# To enable a cache of proxied content, uncomment the fol...
# See http://httpd.apache.org/docs/2.2/mod/mod_cache.html...
#
#<IfModule mod_disk_cache.c>
# CacheEnable disk /
# CacheRoot "/var/cache/mod_proxy"
#</IfModule>
#
#</IfModule>
# End of proxy directives.
### Section 3: Virtual Hosts
#
# VirtualHost: If you want to maintain multiple domains/h...
# machine you can setup VirtualHost containers for them. ...
# use only name-based virtual hosts so the server doesn't...
# IP addresses. This is indicated by the asterisks in the...
#
# Please see the documentation at
# <URL:http://httpd.apache.org/docs/2.2/vhosts/>
# for further details before you try to setup virtual hos...
#
# You may use the command line option '-S' to verify your...
# configuration.
#
# Use name-based virtual hosting.
#
#NameVirtualHost *:80
NameVirtualHost 192.168.0.30:80
#
# NOTE: NameVirtualHost cannot be used without a port spe...
# (e.g. :80) if mod_ssl is being used, due to the nature ...
# SSL protocol.
#
#
# VirtualHost example:
# Almost any Apache directive may go into a VirtualHost c...
# The first VirtualHost section is used for requests with...
# server name.
#
#<VirtualHost *:80>
# ServerAdmin webmaster@dummy-host.example.com
# DocumentRoot /www/docs/dummy-host.example.com
# ServerName dummy-host.example.com
# ErrorLog logs/dummy-host.example.com-error_log
# CustomLog logs/dummy-host.example.com-access_log com...
#</VirtualHost>
# Virtual host Default Virtual Host
<VirtualHost *>
ServerSignature email
DirectoryIndex index.php index.html index.htm index.sht...
LogLevel warn
HostNameLookups off
</VirtualHost>
# Virtual host pixie.homeip.net
<VirtualHost 192.168.0.30:80>
DocumentRoot /home/blog_folder
ServerAdmin panhead@draconia.jp
ServerName pixie.homeip.net
DirectoryIndex index.html index.htm index.shtml index.php
<Directory "/home/blog_folder/">
Options all
AllowOverride all
</Directory>
</VirtualHost>
# Virtual host panhead.homeip.net
<VirtualHost 192.168.0.30:80>
DocumentRoot /home/panhead/public_html
ServerAdmin panhead@draconia.jp
ServerName panhead.homeip.net
DirectoryIndex index.html index.htm index.shtml index.php
<Directory "/home/panhead/public_html/">
Options all
AllowOverride all
</Directory>
</VirtualHost>
# Virtual host iori.homeip.net
<VirtualHost 192.168.0.30:80>
DocumentRoot /home/iori/public_html
ServerAdmin iori@draconia.jp
ServerName iori.homeip.net
DirectoryIndex index.html index.htm index.shtml index.php
<Directory "/home/iori/public_html/">
Options all
AllowOverride all
</Directory>
</VirtualHost>
# Virtual host mrnobody.kicks-ass.net
<VirtualHost 192.168.0.30:80>
DocumentRoot /home/www/mrnobody
ServerAdmin cpt_nobody@yahoo.co.jp
ServerName mrnobody.kicks-ass.net
DirectoryIndex index.html index.htm index.shtml index.php
<Directory "/home/www/mrnobody/">
Options all
AllowOverride all
</Directory>
</VirtualHost>
# Virtual host rankintaxi.is-a-geek.net
<VirtualHost 192.168.0.30:80>
DocumentRoot /home/blog_folder/rankin
ServerAdmin panhead@draconia.jp
ServerName rankintaxi.is-a-geek.net
DirectoryIndex index.html index.htm index.shtml index.php
<Directory "/home/blog_folder/rankin/">
Options all
AllowOverride all
</Directory>
</VirtualHost>
終了行:
#
# This is the main Apache server configuration file. It ...
# configuration directives that give the server its instr...
# See <URL:http://httpd.apache.org/docs/2.2/> for detaile...
# In particular, see
# <URL:http://httpd.apache.org/docs/2.2/mod/directives.ht...
# for a discussion of each configuration directive.
#
#
# Do NOT simply read the instructions in here without und...
# what they do. They're here only as hints or reminders....
# consult the online docs. You have been warned.
#
# The configuration directives are grouped into three bas...
# 1. Directives that control the operation of the Apache...
# whole (the 'global environment').
# 2. Directives that define the parameters of the 'main'...
# which responds to requests that aren't handled by a...
# These directives also provide default values for th...
# of all virtual hosts.
# 3. Settings for virtual hosts, which allow Web request...
# different IP addresses or hostnames and have them h...
# same Apache server process.
#
# Configuration and logfile names: If the filenames you s...
# of the server's control files begin with "/" (or "drive...
# server will use that explicit path. If the filenames d...
# with "/", the value of ServerRoot is prepended -- so "l...
# with ServerRoot set to "/etc/httpd" will be interpreted...
# server as "/etc/httpd/logs/foo.log".
#
### Section 1: Global Environment
#
# The directives in this section affect the overall opera...
# such as the number of concurrent requests it can handle...
# can find its configuration files.
#
#
# Don't give away too much information about all the subc...
# we are running. Comment out this line if you don't min...
# finding out what major optional modules you are running
ServerTokens OS
#
# ServerRoot: The top of the directory tree under which t...
# configuration, error, and log files are kept.
#
# NOTE! If you intend to place this on an NFS (or otherw...
# mounted filesystem then please read the LockFile docume...
# (available at <URL:http://httpd.apache.org/docs/2.2/mod...
# you will save yourself a lot of trouble.
#
# Do NOT add a slash at the end of the directory path.
#
ServerRoot "/etc/httpd"
#
# PidFile: The file in which the server should record its...
# identification number when it starts.
#
PidFile run/httpd.pid
#
# Timeout: The number of seconds before receives and send...
#
Timeout 120
#
# KeepAlive: Whether or not to allow persistent connectio...
# one request per connection). Set to "Off" to deactivate.
#
KeepAlive Off
#
# MaxKeepAliveRequests: The maximum number of requests to...
# during a persistent connection. Set to 0 to allow an un...
# We recommend you leave this number high, for maximum pe...
#
MaxKeepAliveRequests 100
#
# KeepAliveTimeout: Number of seconds to wait for the nex...
# same client on the same connection.
#
KeepAliveTimeout 15
##
## Server-Pool Size Regulation (MPM specific)
##
# prefork MPM
# StartServers: number of server processes to start
# MinSpareServers: minimum number of server processes whi...
# MaxSpareServers: maximum number of server processes whi...
# ServerLimit: maximum value for MaxClients for the lifet...
# MaxClients: maximum number of server processes allowed ...
# MaxRequestsPerChild: maximum number of requests a serve...
<IfModule prefork.c>
StartServers 8
MinSpareServers 5
MaxSpareServers 20
ServerLimit 256
MaxClients 256
MaxRequestsPerChild 4000
</IfModule>
# worker MPM
# StartServers: initial number of server processes to start
# MaxClients: maximum number of simultaneous client conne...
# MinSpareThreads: minimum number of worker threads which...
# MaxSpareThreads: maximum number of worker threads which...
# ThreadsPerChild: constant number of worker threads in e...
# MaxRequestsPerChild: maximum number of requests a serve...
<IfModule worker.c>
StartServers 2
MaxClients 150
MinSpareThreads 25
MaxSpareThreads 75
ThreadsPerChild 25
MaxRequestsPerChild 0
</IfModule>
#
# Listen: Allows you to bind Apache to specific IP addres...
# ports, in addition to the default. See also the <Virtua...
# directive.
#
# Change this to Listen on specific IP addresses as shown...
# prevent Apache from glomming onto all bound IP addresse...
#
#Listen 12.34.56.78:80
Listen 80
#
# Dynamic Shared Object (DSO) Support
#
# To be able to use the functionality of a module which w...
# have to place corresponding `LoadModule' lines at this ...
# directives contained in it are actually available _befo...
# Statically compiled modules (those listed by `httpd -l'...
# to be loaded here.
#
# Example:
# LoadModule foo_module modules/mod_foo.so
#
LoadModule auth_basic_module modules/mod_auth_basic.so
LoadModule auth_digest_module modules/mod_auth_digest.so
LoadModule authn_file_module modules/mod_authn_file.so
LoadModule authn_alias_module modules/mod_authn_alias.so
LoadModule authn_anon_module modules/mod_authn_anon.so
LoadModule authn_dbm_module modules/mod_authn_dbm.so
LoadModule authn_default_module modules/mod_authn_default...
LoadModule authz_host_module modules/mod_authz_host.so
LoadModule authz_user_module modules/mod_authz_user.so
LoadModule authz_owner_module modules/mod_authz_owner.so
LoadModule authz_groupfile_module modules/mod_authz_group...
LoadModule authz_dbm_module modules/mod_authz_dbm.so
LoadModule authz_default_module modules/mod_authz_default...
LoadModule ldap_module modules/mod_ldap.so
LoadModule authnz_ldap_module modules/mod_authnz_ldap.so
LoadModule include_module modules/mod_include.so
LoadModule log_config_module modules/mod_log_config.so
LoadModule logio_module modules/mod_logio.so
LoadModule env_module modules/mod_env.so
LoadModule ext_filter_module modules/mod_ext_filter.so
LoadModule mime_magic_module modules/mod_mime_magic.so
LoadModule expires_module modules/mod_expires.so
LoadModule deflate_module modules/mod_deflate.so
LoadModule headers_module modules/mod_headers.so
LoadModule usertrack_module modules/mod_usertrack.so
LoadModule setenvif_module modules/mod_setenvif.so
LoadModule mime_module modules/mod_mime.so
LoadModule dav_module modules/mod_dav.so
LoadModule status_module modules/mod_status.so
LoadModule autoindex_module modules/mod_autoindex.so
LoadModule info_module modules/mod_info.so
LoadModule dav_fs_module modules/mod_dav_fs.so
LoadModule vhost_alias_module modules/mod_vhost_alias.so
LoadModule negotiation_module modules/mod_negotiation.so
LoadModule dir_module modules/mod_dir.so
LoadModule actions_module modules/mod_actions.so
LoadModule speling_module modules/mod_speling.so
LoadModule userdir_module modules/mod_userdir.so
LoadModule alias_module modules/mod_alias.so
LoadModule rewrite_module modules/mod_rewrite.so
LoadModule proxy_module modules/mod_proxy.so
LoadModule proxy_balancer_module modules/mod_proxy_balanc...
LoadModule proxy_ftp_module modules/mod_proxy_ftp.so
LoadModule proxy_http_module modules/mod_proxy_http.so
LoadModule proxy_connect_module modules/mod_proxy_connect...
LoadModule cache_module modules/mod_cache.so
LoadModule suexec_module modules/mod_suexec.so
LoadModule disk_cache_module modules/mod_disk_cache.so
LoadModule file_cache_module modules/mod_file_cache.so
LoadModule mem_cache_module modules/mod_mem_cache.so
LoadModule cgi_module modules/mod_cgi.so
#
# The following modules are not loaded by default:
#
#LoadModule cern_meta_module modules/mod_cern_meta.so
#LoadModule asis_module modules/mod_asis.so
#
# Load config files from the config directory "/etc/httpd...
#
Include conf.d/*.conf
#
# ExtendedStatus controls whether Apache will generate "f...
# information (ExtendedStatus On) or just basic informati...
# Off) when the "server-status" handler is called. The de...
#
#ExtendedStatus On
#
# If you wish httpd to run as a different user or group, ...
# httpd as root initially and it will switch.
#
# User/Group: The name (or #number) of the user/group to ...
# . On SCO (ODT 3) use "User nouser" and "Group nogroup".
# . On HPUX you may not be able to use shared memory as ...
# suggested workaround is to create a user www and use...
# NOTE that some kernels refuse to setgid(Group) or semc...
# when the value of (unsigned)Group is above 60000;
# don't use Group #-1 on these systems!
#
User apache
Group apache
### Section 2: 'Main' server configuration
#
# The directives in this section set up the values used b...
# server, which responds to any requests that aren't hand...
# <VirtualHost> definition. These values also provide de...
# any <VirtualHost> containers you may define later in th...
#
# All of these directives may appear inside <VirtualHost>...
# in which case these default settings will be overridden...
# virtual host being defined.
#
#
# ServerAdmin: Your address, where problems with the serv...
# e-mailed. This address appears on some server-generate...
# as error documents. e.g. admin@your-domain.com
#
ServerAdmin panhead@draconia.jp
#
# ServerName gives the name and port that the server uses...
# This can often be determined automatically, but we reco...
# it explicitly to prevent problems during startup.
#
# If this is not set to valid DNS name for your host, ser...
# redirections will not work. See also the UseCanonicalN...
#
# If your host doesn't have a registered DNS name, enter ...
# You will have to access it by its address anyway, and t...
# redirections work in a sensible way.
#
#ServerName panhead.homeip.net
#
# UseCanonicalName: Determines how Apache constructs self...
# URLs and the SERVER_NAME and SERVER_PORT variables.
# When set "Off", Apache will use the Hostname and Port s...
# by the client. When set "On", Apache will use the valu...
# ServerName directive.
#
UseCanonicalName on
#
# DocumentRoot: The directory out of which you will serve...
# documents. By default, all requests are taken from this...
# symbolic links and aliases may be used to point to othe...
#
DocumentRoot "/var/www/html"
#
# Each directory to which Apache has access can be config...
# to which services and features are allowed and/or disab...
# directory (and its subdirectories).
#
# First, we configure the "default" to be a very restrict...
# features.
#
<Directory />
Options FollowSymLinks ExecCGI
AllowOverride None
</Directory>
#
# Note that from this point forward you must specifically...
# particular features to be enabled - so if something's n...
# you might expect, make sure that you have specifically ...
# below.
#
#
# This should be changed to whatever you set DocumentRoot...
#
<Directory "/var/www/html">
#
# Possible values for the Options directive are "None", "...
# or any combination of:
# Indexes Includes FollowSymLinks SymLinksifOwnerMatch ...
#
# Note that "MultiViews" must be named *explicitly* --- "...
# doesn't give it to you.
#
# The Options directive is both complicated and important...
# http://httpd.apache.org/docs/2.2/mod/core.html#options
# for more information.
#
Options Indexes FollowSymLinks
#
# AllowOverride controls what directives may be placed in...
# It can be "All", "None", or any combination of the keyw...
# Options FileInfo AuthConfig Limit
#
AllowOverride All
#
# Controls who can get stuff from this server.
#
Order allow,deny
Allow from all
</Directory>
#
# UserDir: The name of the directory that is appended ont...
# directory if a ~user request is received.
#
# The path to the end user account 'public_html' director...
# accessible to the webserver userid. This usually means...
# must have permissions of 711, ~userid/public_html must ...
# of 755, and documents contained therein must be world-r...
# Otherwise, the client will only receive a "403 Forbidde...
#
# See also: http://httpd.apache.org/docs/misc/FAQ.html#fo...
#
<IfModule mod_userdir.c>
#
# UserDir is disabled by default since it can confirm...
# of a username on the system (depending on home dire...
# permissions).
#
UserDir disable
#
# To enable requests to /~user/ to serve the user's p...
# directory, remove the "UserDir disable" line above,...
# the following line instead:
#
#UserDir public_html
</IfModule>
#
# Control access to UserDir directories. The following i...
# for a site where these directories are restricted to re...
#
#<Directory /home/*/public_html>
# AllowOverride FileInfo AuthConfig Limit
# Options MultiViews Indexes SymLinksIfOwnerMatch Incl...
# <Limit GET POST OPTIONS>
# Order allow,deny
# Allow from all
# </Limit>
# <LimitExcept GET POST OPTIONS>
# Order deny,allow
# Deny from all
# </LimitExcept>
#</Directory>
#
# DirectoryIndex: sets the file that Apache will serve if...
# is requested.
#
# The index.html.var file (a type-map) is used to deliver...
# negotiated documents. The MultiViews Option can be use...
# same purpose, but it is much slower.
#
DirectoryIndex index.html index.html.var
#
# AccessFileName: The name of the file to look for in eac...
# for additional configuration directives. See also the ...
# directive.
#
AccessFileName .htaccess
#
# The following lines prevent .htaccess and .htpasswd fil...
# viewed by Web clients.
#
<Files ~ "^\.ht">
Order allow,deny
Deny from all
</Files>
#
# TypesConfig describes where the mime.types file (or equ...
# to be found.
#
TypesConfig /etc/mime.types
#
# DefaultType is the default MIME type the server will us...
# if it cannot otherwise determine one, such as from file...
# If your server contains mostly text or HTML documents, ...
# a good value. If most of your content is binary, such ...
# or images, you may want to use "application/octet-strea...
# keep browsers from trying to display binary files as th...
# text.
#
DefaultType text/plain
#
# The mod_mime_magic module allows the server to use vari...
# contents of the file itself to determine its type. The...
# directive tells the module where the hint definitions a...
#
<IfModule mod_mime_magic.c>
# MIMEMagicFile /usr/share/magic.mime
MIMEMagicFile conf/magic
</IfModule>
#
# HostnameLookups: Log the names of clients or just their...
# e.g., www.apache.org (on) or 204.62.129.132 (off).
# The default is off because it'd be overall better for t...
# had to knowingly turn this feature on, since enabling i...
# each client request will result in AT LEAST one lookup ...
# nameserver.
#
HostnameLookups Off
#
# EnableMMAP: Control whether memory-mapping is used to d...
# files (assuming that the underlying OS supports it).
# The default is on; turn this off if you serve from NFS-...
# filesystems. On some systems, turning it off (regardle...
# filesystem) can improve performance; for details, pleas...
# http://httpd.apache.org/docs/2.2/mod/core.html#enablemmap
#
#EnableMMAP off
#
# EnableSendfile: Control whether the sendfile kernel sup...
# used to deliver files (assuming that the OS supports it...
# The default is on; turn this off if you serve from NFS-...
# filesystems. Please see
# http://httpd.apache.org/docs/2.2/mod/core.html#enablese...
#
#EnableSendfile off
#
# ErrorLog: The location of the error log file.
# If you do not specify an ErrorLog directive within a <V...
# container, error messages relating to that virtual host...
# logged here. If you *do* define an error logfile for a...
# container, that host's errors will be logged there and ...
#
ErrorLog logs/error_log
#
# LogLevel: Control the number of messages logged to the ...
# Possible values include: debug, info, notice, warn, err...
# alert, emerg.
#
LogLevel warn
#
# The following directives define some format nicknames f...
# a CustomLog directive (see below).
#
LogFormat "%h %l %u %t \"%r\" %>s %b \"%{Referer}i\" \"%{...
LogFormat "%h %l %u %t \"%r\" %>s %b" common
LogFormat "%{Referer}i -> %U" referer
LogFormat "%{User-agent}i" agent
# "combinedio" includes actual counts of actual bytes rec...
# requires the mod_logio module to be loaded.
#LogFormat "%h %l %u %t \"%r\" %>s %b \"%{Referer}i\" \"%...
#
# The location and format of the access logfile (Common L...
# If you do not define any access logfiles within a <Virt...
# container, they will be logged here. Contrariwise, if ...
# define per-<VirtualHost> access logfiles, transactions ...
# logged therein and *not* in this file.
#
#CustomLog logs/access_log common
#
# If you would like to have separate agent and referer lo...
# the following directives.
#
#CustomLog logs/referer_log referer
#CustomLog logs/agent_log agent
#
# For a single logfile with access, agent, and referer in...
# (Combined Logfile Format), use the following directive:
#
CustomLog logs/access_log combined
#
# Optionally add a line containing the server version and...
# name to server-generated pages (internal error document...
# listings, mod_status and mod_info output etc., but not ...
# documents or custom error documents).
# Set to "EMail" to also include a mailto: link to the Se...
# Set to one of: On | Off | EMail
#
ServerSignature On
#
# Aliases: Add here as many aliases as you need (with no ...
# Alias fakename realname
#
# Note that if you include a trailing / on fakename then ...
# require it to be present in the URL. So "/icons" isn't...
# example, only "/icons/". If the fakename is slash-term...
# realname must also be slash terminated, and if the fake...
# trailing slash, the realname must also omit it.
#
# We include the /icons/ alias for FancyIndexed directory...
# do not use FancyIndexing, you may comment this out.
#
Alias /icons/ "/var/www/icons/"
<Directory "/var/www/icons">
Options Indexes MultiViews FollowSymLinks
AllowOverride None
Order allow,deny
Allow from all
</Directory>
#
# WebDAV module configuration section.
#
<IfModule mod_dav_fs.c>
# Location of the WebDAV lock database.
DAVLockDB /var/lib/dav/lockdb
</IfModule>
#
# ScriptAlias: This controls which directories contain se...
# ScriptAliases are essentially the same as Aliases, exce...
# documents in the realname directory are treated as appl...
# run by the server when requested rather than as documen...
# The same rules about trailing "/" apply to ScriptAlias ...
# Alias.
#
ScriptAlias /cgi-bin/ "/var/www/cgi-bin/"
#
# "/var/www/cgi-bin" should be changed to whatever your S...
# CGI directory exists, if you have that configured.
#
#<Directory "/var/www/cgi-bin">
# AllowOverride None
# Options None
# Order allow,deny
# Allow from all
#</Directory>
#from Fedora4
<Directory "/var/www/cgi-bin">
Options ExecCGI
AllowOverride None
Allow from all
Order allow,deny
</Directory>
#
# Redirect allows you to tell clients about documents whi...
# your server's namespace, but do not anymore. This allow...
# clients where to look for the relocated document.
# Example:
# Redirect permanent /foo http://www.example.com/bar
#
# Directives controlling the display of server-generated ...
#
#
# IndexOptions: Controls the appearance of server-generat...
# listings.
#
IndexOptions FancyIndexing VersionSort NameWidth=* HTMLTa...
#
# AddIcon* directives tell the server which icon to show ...
# files or filename extensions. These are only displayed...
# FancyIndexed directories.
#
AddIconByEncoding (CMP,/icons/compressed.gif) x-compress ...
AddIconByType (TXT,/icons/text.gif) text/*
AddIconByType (IMG,/icons/image2.gif) image/*
AddIconByType (SND,/icons/sound2.gif) audio/*
AddIconByType (VID,/icons/movie.gif) video/*
AddIcon /icons/binary.gif .bin .exe
AddIcon /icons/binhex.gif .hqx
AddIcon /icons/tar.gif .tar
AddIcon /icons/world2.gif .wrl .wrl.gz .vrml .vrm .iv
AddIcon /icons/compressed.gif .Z .z .tgz .gz .zip
AddIcon /icons/a.gif .ps .ai .eps
AddIcon /icons/layout.gif .html .shtml .htm .pdf
AddIcon /icons/text.gif .txt
AddIcon /icons/c.gif .c
AddIcon /icons/p.gif .pl .py
AddIcon /icons/f.gif .for
AddIcon /icons/dvi.gif .dvi
AddIcon /icons/uuencoded.gif .uu
AddIcon /icons/script.gif .conf .sh .shar .csh .ksh .tcl
AddIcon /icons/tex.gif .tex
AddIcon /icons/bomb.gif core
AddIcon /icons/back.gif ..
AddIcon /icons/hand.right.gif README
AddIcon /icons/folder.gif ^^DIRECTORY^^
AddIcon /icons/blank.gif ^^BLANKICON^^
#
# DefaultIcon is which icon to show for files which do no...
# explicitly set.
#
DefaultIcon /icons/unknown.gif
#
# AddDescription allows you to place a short description ...
# server-generated indexes. These are only displayed for...
# directories.
# Format: AddDescription "description" filename
#
#AddDescription "GZIP compressed document" .gz
#AddDescription "tar archive" .tar
#AddDescription "GZIP compressed tar archive" .tgz
#
# ReadmeName is the name of the README file the server wi...
# default, and append to directory listings.
#
# HeaderName is the name of a file which should be prepen...
# directory indexes.
ReadmeName README.html
HeaderName HEADER.html
#
# IndexIgnore is a set of filenames which directory index...
# and not include in the listing. Shell-style wildcardin...
#
IndexIgnore .??* *~ *# HEADER* README* RCS CVS *,v *,t
#
# DefaultLanguage and AddLanguage allows you to specify t...
# a document. You can then use content negotiation to giv...
# file in a language the user can understand.
#
# Specify a default language. This means that all data
# going out without a specific language tag (see below) w...
# be marked with this one. You probably do NOT want to set
# this unless you are sure it is correct for all cases.
#
# * It is generally better to not mark a page as
# * being a certain language than marking it with the wrong
# * language!
#
# DefaultLanguage nl
#
# Note 1: The suffix does not have to be the same as the ...
# keyword --- those with documents in Polish (whose net-s...
# language code is pl) may wish to use "AddLanguage pl .p...
# avoid the ambiguity with the common suffix for perl scr...
#
# Note 2: The example entries below illustrate that in so...
# the two character 'Language' abbreviation is not identi...
# the two character 'Country' code for its country,
# E.g. 'Danmark/dk' versus 'Danish/da'.
#
# Note 3: In the case of 'ltz' we violate the RFC by usin...
# specifier. There is 'work in progress' to fix this and ...
# the reference data for rfc1766 cleaned up.
#
# Catalan (ca) - Croatian (hr) - Czech (cs) - Danish (da)...
# English (en) - Esperanto (eo) - Estonian (et) - French ...
# Greek-Modern (el) - Hebrew (he) - Italian (it) - Japane...
# Korean (ko) - Luxembourgeois* (ltz) - Norwegian Nynorsk...
# Norwegian (no) - Polish (pl) - Portugese (pt)
# Brazilian Portuguese (pt-BR) - Russian (ru) - Swedish (...
# Simplified Chinese (zh-CN) - Spanish (es) - Traditional...
#
AddLanguage ca .ca
AddLanguage cs .cz .cs
AddLanguage da .dk
AddLanguage de .de
AddLanguage el .el
AddLanguage en .en
AddLanguage eo .eo
AddLanguage es .es
AddLanguage et .et
AddLanguage fr .fr
AddLanguage he .he
AddLanguage hr .hr
AddLanguage it .it
AddLanguage ja .ja
AddLanguage ko .ko
AddLanguage ltz .ltz
AddLanguage nl .nl
AddLanguage nn .nn
AddLanguage no .no
AddLanguage pl .po
AddLanguage pt .pt
AddLanguage pt-BR .pt-br
AddLanguage ru .ru
AddLanguage sv .sv
AddLanguage zh-CN .zh-cn
AddLanguage zh-TW .zh-tw
#
# LanguagePriority allows you to give precedence to some ...
# in case of a tie during content negotiation.
#
# Just list the languages in decreasing order of preferen...
# more or less alphabetized them here. You probably want ...
#
LanguagePriority ja en ca cs da de el eo es et fr he hr i...
#
# ForceLanguagePriority allows you to serve a result page...
# MULTIPLE CHOICES (Prefer) [in case of a tie] or NOT ACC...
# [in case no accepted languages matched the available va...
#
ForceLanguagePriority Prefer Fallback
#
# Specify a default charset for all content served; this ...
# interpretation of all content as UTF-8 by default. To ...
# default browser choice (ISO-8859-1), or to allow the ME...
# in HTML content to override this choice, comment out this
# directive:
#
#AddDefaultCharset UTF-8
#
# AddType allows you to add to or override the MIME confi...
# file mime.types for specific file types.
#
#AddType application/x-tar .tgz
#
# AddEncoding allows you to have certain browsers uncompr...
# information on the fly. Note: Not all browsers support ...
# Despite the name similarity, the following Add* directi...
# to do with the FancyIndexing customization directives a...
#
#AddEncoding x-compress .Z
#AddEncoding x-gzip .gz .tgz
# If the AddEncoding directives above are commented-out, ...
# probably should define those extensions to indicate med...
#
AddType application/x-compress .Z
AddType application/x-gzip .gz .tgz
#
# AddHandler allows you to map certain file extensions to...
# actions unrelated to filetype. These can be either buil...
# or added with the Action directive (see below)
#
# To use CGI scripts outside of ScriptAliased directories:
# (You will also need to add "ExecCGI" to the "Options" d...
#
AddHandler cgi-script .cgi
#
# For files that include their own HTTP headers:
#
#AddHandler send-as-is asis
#
# For type maps (negotiated resources):
# (This is enabled by default to allow the Apache "It Wor...
# to be distributed in multiple languages.)
#
AddHandler type-map var
#
# Filters allow you to process content before it is sent ...
#
# To parse .shtml files for server-side includes (SSI):
# (You will also need to add "Includes" to the "Options" ...
#
AddType text/html .shtml
AddOutputFilter INCLUDES .shtml
#
# Action lets you define media types that will execute a ...
# a matching file is called. This eliminates the need for...
# pathnames for oft-used CGI file processors.
# Format: Action media/type /cgi-script/location
# Format: Action handler-name /cgi-script/location
#
#
# Customizable error responses come in three flavors:
# 1) plain text 2) local redirects 3) external redirects
#
# Some examples:
#ErrorDocument 500 "The server made a boo boo."
#ErrorDocument 404 /missing.html
#ErrorDocument 404 "/cgi-bin/missing_handler.pl"
#ErrorDocument 402 http://www.example.com/subscription_in...
#
#
# Putting this all together, we can internationalize erro...
#
# We use Alias to redirect any /error/HTTP_<error>.html.v...
# our collection of by-error message multi-language colle...
# includes to substitute the appropriate text.
#
# You can modify the messages' appearance without changin...
# default HTTP_<error>.html.var files by adding the line:
#
# Alias /error/include/ "/your/include/path/"
#
# which allows you to create your own set of files by sta...
# /var/www/error/include/ files and
# copying them to /your/include/path/, even on a per-Virt...
#
Alias /error/ "/var/www/error/"
<IfModule mod_negotiation.c>
<IfModule mod_include.c>
<Directory "/var/www/error">
AllowOverride None
Options IncludesNoExec
AddOutputFilter Includes html
AddHandler type-map var
Order allow,deny
Allow from all
LanguagePriority en es de fr
ForceLanguagePriority Prefer Fallback
</Directory>
# ErrorDocument 400 /error/HTTP_BAD_REQUEST.html.var
# ErrorDocument 401 /error/HTTP_UNAUTHORIZED.html.var
# ErrorDocument 403 /error/HTTP_FORBIDDEN.html.var
# ErrorDocument 404 /error/HTTP_NOT_FOUND.html.var
# ErrorDocument 405 /error/HTTP_METHOD_NOT_ALLOWED.htm...
# ErrorDocument 408 /error/HTTP_REQUEST_TIME_OUT.html....
# ErrorDocument 410 /error/HTTP_GONE.html.var
# ErrorDocument 411 /error/HTTP_LENGTH_REQUIRED.html.var
# ErrorDocument 412 /error/HTTP_PRECONDITION_FAILED.ht...
# ErrorDocument 413 /error/HTTP_REQUEST_ENTITY_TOO_LAR...
# ErrorDocument 414 /error/HTTP_REQUEST_URI_TOO_LARGE....
# ErrorDocument 415 /error/HTTP_UNSUPPORTED_MEDIA_TYPE...
# ErrorDocument 500 /error/HTTP_INTERNAL_SERVER_ERROR....
# ErrorDocument 501 /error/HTTP_NOT_IMPLEMENTED.html.var
# ErrorDocument 502 /error/HTTP_BAD_GATEWAY.html.var
# ErrorDocument 503 /error/HTTP_SERVICE_UNAVAILABLE.ht...
# ErrorDocument 506 /error/HTTP_VARIANT_ALSO_VARIES.ht...
</IfModule>
</IfModule>
#
# The following directives modify normal HTTP response be...
# handle known problems with browser implementations.
#
BrowserMatch "Mozilla/2" nokeepalive
BrowserMatch "MSIE 4\.0b2;" nokeepalive downgrade-1.0 for...
BrowserMatch "RealPlayer 4\.0" force-response-1.0
BrowserMatch "Java/1\.0" force-response-1.0
BrowserMatch "JDK/1\.0" force-response-1.0
#
# The following directive disables redirects on non-GET r...
# a directory that does not include the trailing slash. ...
# problem with Microsoft WebFolders which does not approp...
# redirects for folders with DAV methods.
# Same deal with Apple's DAV filesystem and Gnome VFS sup...
#
BrowserMatch "Microsoft Data Access Internet Publishing P...
BrowserMatch "MS FrontPage" redirect-carefully
BrowserMatch "^WebDrive" redirect-carefully
BrowserMatch "^WebDAVFS/1.[0123]" redirect-carefully
BrowserMatch "^gnome-vfs/1.0" redirect-carefully
BrowserMatch "^XML Spy" redirect-carefully
BrowserMatch "^Dreamweaver-WebDAV-SCM1" redirect-carefully
#
# Allow server status reports generated by mod_status,
# with the URL of http://servername/server-status
# Change the ".example.com" to match your domain to enable.
#
#<Location /server-status>
# SetHandler server-status
# Order deny,allow
# Deny from all
# Allow from .example.com
#</Location>
#
# Allow remote server configuration reports, with the URL...
# http://servername/server-info (requires that mod_info....
# Change the ".example.com" to match your domain to enable.
#
#<Location /server-info>
# SetHandler server-info
# Order deny,allow
# Deny from all
# Allow from .example.com
#</Location>
#
# Proxy Server directives. Uncomment the following lines to
# enable the proxy server:
#
#<IfModule mod_proxy.c>
#ProxyRequests On
#
#<Proxy *>
# Order deny,allow
# Deny from all
# Allow from .example.com
#</Proxy>
#
# Enable/disable the handling of HTTP/1.1 "Via:" headers.
# ("Full" adds the server version; "Block" removes all ou...
# Set to one of: Off | On | Full | Block
#
#ProxyVia On
#
# To enable a cache of proxied content, uncomment the fol...
# See http://httpd.apache.org/docs/2.2/mod/mod_cache.html...
#
#<IfModule mod_disk_cache.c>
# CacheEnable disk /
# CacheRoot "/var/cache/mod_proxy"
#</IfModule>
#
#</IfModule>
# End of proxy directives.
### Section 3: Virtual Hosts
#
# VirtualHost: If you want to maintain multiple domains/h...
# machine you can setup VirtualHost containers for them. ...
# use only name-based virtual hosts so the server doesn't...
# IP addresses. This is indicated by the asterisks in the...
#
# Please see the documentation at
# <URL:http://httpd.apache.org/docs/2.2/vhosts/>
# for further details before you try to setup virtual hos...
#
# You may use the command line option '-S' to verify your...
# configuration.
#
# Use name-based virtual hosting.
#
#NameVirtualHost *:80
NameVirtualHost 192.168.0.30:80
#
# NOTE: NameVirtualHost cannot be used without a port spe...
# (e.g. :80) if mod_ssl is being used, due to the nature ...
# SSL protocol.
#
#
# VirtualHost example:
# Almost any Apache directive may go into a VirtualHost c...
# The first VirtualHost section is used for requests with...
# server name.
#
#<VirtualHost *:80>
# ServerAdmin webmaster@dummy-host.example.com
# DocumentRoot /www/docs/dummy-host.example.com
# ServerName dummy-host.example.com
# ErrorLog logs/dummy-host.example.com-error_log
# CustomLog logs/dummy-host.example.com-access_log com...
#</VirtualHost>
# Virtual host Default Virtual Host
<VirtualHost *>
ServerSignature email
DirectoryIndex index.php index.html index.htm index.sht...
LogLevel warn
HostNameLookups off
</VirtualHost>
# Virtual host pixie.homeip.net
<VirtualHost 192.168.0.30:80>
DocumentRoot /home/blog_folder
ServerAdmin panhead@draconia.jp
ServerName pixie.homeip.net
DirectoryIndex index.html index.htm index.shtml index.php
<Directory "/home/blog_folder/">
Options all
AllowOverride all
</Directory>
</VirtualHost>
# Virtual host panhead.homeip.net
<VirtualHost 192.168.0.30:80>
DocumentRoot /home/panhead/public_html
ServerAdmin panhead@draconia.jp
ServerName panhead.homeip.net
DirectoryIndex index.html index.htm index.shtml index.php
<Directory "/home/panhead/public_html/">
Options all
AllowOverride all
</Directory>
</VirtualHost>
# Virtual host iori.homeip.net
<VirtualHost 192.168.0.30:80>
DocumentRoot /home/iori/public_html
ServerAdmin iori@draconia.jp
ServerName iori.homeip.net
DirectoryIndex index.html index.htm index.shtml index.php
<Directory "/home/iori/public_html/">
Options all
AllowOverride all
</Directory>
</VirtualHost>
# Virtual host mrnobody.kicks-ass.net
<VirtualHost 192.168.0.30:80>
DocumentRoot /home/www/mrnobody
ServerAdmin cpt_nobody@yahoo.co.jp
ServerName mrnobody.kicks-ass.net
DirectoryIndex index.html index.htm index.shtml index.php
<Directory "/home/www/mrnobody/">
Options all
AllowOverride all
</Directory>
</VirtualHost>
# Virtual host rankintaxi.is-a-geek.net
<VirtualHost 192.168.0.30:80>
DocumentRoot /home/blog_folder/rankin
ServerAdmin panhead@draconia.jp
ServerName rankintaxi.is-a-geek.net
DirectoryIndex index.html index.htm index.shtml index.php
<Directory "/home/blog_folder/rankin/">
Options all
AllowOverride all
</Directory>
</VirtualHost>
ページ名:
![[PukiWiki]](image/pukiwiki.png "[PukiWiki]")
